Forum Members


AvatarMember InformationRegistered date

  Registered |  5/10 | Posts: 289 |
9th November 2014

  Registered |  5/10 | Posts: 273 |
30th March 2014

  Registered |  5/10 | Posts: 267 |
24th March 2015

  Registered |  5/10 | Posts: 256 |
6th March 2016
  Steve N

  Registered |  5/10 | Posts: 250 |
23rd December 2014
  Charles Jackson

  Registered |  4/10 | Posts: 249 |
11th March 2017
  Don Colley

  Registered |  4/10 | Posts: 241 |
5th May 2014

  Registered |  4/10 | Posts: 232 |
22nd April 2014

  Registered |  4/10 | Posts: 219 |
27th June 2015

  Registered |  4/10 | Posts: 207 |
26th April 2017

  Registered |  4/10 | Posts: 183 |
22nd November 2013

  Registered |  4/10 | Posts: 169 |
13th March 2016

  Registered |  4/10 | Posts: 162 |
28th October 2014

  Registered |  4/10 | Posts: 161 |
17th September 2014
  Terry Taylor

  Registered |  4/10 | Posts: 160 |
19th December 2013
Page 2 / 571

This community page and the content inside is publicly visible except in restricted groups. A registered community member is able to post content. Because of the open nature of this forum the content posted may not represent the views of CEL. While we do regularly read the content posted, in some cases the content may not be appropriate for the reader or may cause offence. Please help us by reporting such content. Technical advice provided in this forum may be provided with good intention and a belief that is is correct but may not be applicable to all hardware, software or user ability. In some cases content may not be relevant to newer or older revisions, conflicting or incorrect advice may be contained within conversations, community moderators will attempt to add to this or make corrections but to preserve the thread this may be on following pages or be missed as the forum evolves.

For official advice users should contact the CEL support team via and follow the provided advice to preserve safety, warranty and function of Robox hardware or software.
This applies to any use or alteration which is not specifically described in the officially supplied guides from CEL. Community content should not be considered official even where posted by CEL employees. Only advice provided via the CEL support portal should be considered official.
Robox is a complex machine with many potential uses, to help preserve the good working order of both hardware and software please be patient and note that many common fixes for other 3D printers do not apply to Robox and may cause irreversible damage or compromise safe operation.