Drybox and Robox Pr...
 

Drybox and Robox Pro  

  RSS
olivier
(@olivier-masson)
Eminent Member Customer

Hello

Does anybody use the drybox ? With the pro...

I bought one and it seems a good product, at least for keeping dry the spools.

But, I 'm wondering several things :

# how to plug the tubes between the drybox and the robox :

I imagine I have to :

- remove the part at the entry of the extruder (I will post a picture asap)

- remove this part form the tube arriving from the bottom of the pro

- place this part on a new ptfe tube

- put in place this tube between the exit of the drybox and the extruder of the pro

Is it right ? This part seems printed. Does anybody has the cad file of the part keeping the tube in place ?

 

# how to have spools in the drybox and keep spool information in AM :

Does anybody would have an idea ? I can of course force AM to declare a spool, but how to update the material quantity on the spool chipset ?

 

If you have any feedback about the drybox, some question or whatever, please feel free to share.

Thank you in advance.

Quote
Posted : 8th April 2019 2:08 pm
Topic Tags
olivier
(@olivier-masson)
Eminent Member Customer

I can add the picture directly into this page, so here is a link to follow to see the part :

https://photos.app.goo.gl/Ho3Xx3Zoy9jTwT5T6

ReplyQuote
Posted : 8th April 2019 3:03 pm
BHudson
(@bhudson)
USA Robox Support Moderator

@olivier-masson There are instructions included with the DryBox. You will need to push out the black or gray printed adapter from the printer extruder. The feed tubes from the DryBox just go up to the entrance of the extruder. They do not physically attach to the extruder. This is so that you can remove the tubes when you need to eject the filament. 

If you are not mounting the SmartReel directly to the printer, you cannot use the EEPROM on the SmartReel. The material quantity remaining is only for your reference and is not used by the printer. The printer will physically detect when it is out of filament and does not rely on that value. 

ReplyQuote
Posted : 9th April 2019 4:16 pm
Pete
 Pete
(@pete)
I am Pete Admin

@olivier-masson attached. This is designed to print on one end the overhangs with a chamfer should face down.

This post was modified 1 month ago by Pete

For official support please create a support ticket using this link www.cel-robox.com/support/

ReplyQuote
Posted : 11th April 2019 10:44 am
BHudson
(@bhudson)
USA Robox Support Moderator

The last DryBox I saw didn't have the threads on the ends of the feed tubes from the DryBox. Unless this has changed, the part won't work since the tubes need to be threaded.

I would also personally print that with the large flat side down - printing it on end exposes the part to stress across the print layers and increases the chance of a failure. 

ReplyQuote
Posted : 11th April 2019 6:30 pm
Pete
 Pete
(@pete)
I am Pete Admin

I must admit I have not printed this. Go with Ben's advice 🙂

For official support please create a support ticket using this link www.cel-robox.com/support/

ReplyQuote
Posted : 12th April 2019 11:03 am
Share:
This community page and the content inside is publicly visible except in restricted groups. A registered community member is able to post content. Because of the open nature of this forum the content posted may not represent the views of CEL. While we do regularly read the content posted, in some cases the content may not be appropriate for the reader or may cause offence. Please help us by reporting such content. Technical advice provided in this forum may be provided with good intention and a belief that is is correct but may not be applicable to all hardware, software or user ability. In some cases content may not be relevant to newer or older revisions, conflicting or incorrect advice may be contained within conversations, community moderators will attempt to add to this or make corrections but to preserve the thread this may be on following pages or be missed as the forum evolves.
For official advice users should contact the CEL support team via www.cel-robox.com/support/ and follow the provided advice to preserve safety, warranty and function of Robox hardware or software. This applies to any use or alteration which is not specifically described in the officially supplied guides from CEL. Community content should not be considered official even where posted by CEL employees. Only advice provided via the CEL support portal should be considered official.
Robox is a complex machine with many potential uses, to help preserve the good working order of both hardware and software please be patient and note that many common fixes for other 3D printers do not apply to Robox and may cause irreversible damage or compromise safe operation.