A short section of bowden tube which can be used to help with loading flexible filament.
Short Section of Bowden Tube
£1.50 / £1.25 before tax
A short section of bowden tube which can be used to help with loading flexible filament. By using this tube the filament will bunch less enabling you to push it further into the feed mechanism.
Put this short section of tube into the filament feed tube for Material 1: or Material 2: then feed the filament through it. It is fine to use with other filaments as well.
Typical length is 140mm but this is not critical so the length may vary.
|Dimensions||21 × 17 × 1 cm|